太阳集团城网站2017-首页|欢迎您

MNS Low Voltage Distribution Cabinet

Product

MNS Low Voltage Distribution Cabinet




Product introduction

      MNS low-voltage withdrawable type complete switchgear (hereinafter referred to as the switch cabinet) in order to adapt to the needs of the development of the electric power industry reference foreign series of MNS low-voltage switchgear design and improve the development of advanced type low voltage switchgear, the products meet the national standards, GB7251 VDE660 and ZBK36001-89 ", "low voltage draw-out switchgear it, international standard type MNS low-voltage switchgear meet the needs of the various power supply, power distribution, can be widely used in power plants, substations, industrial and mining enterprises, building hotels, municipal construction and other various kinds of low-voltage distribution system.

Service conditions

1. The ambient air temperature is no higher than +40℃ and no lower than -5℃, and the average temperature within 24 hours is no higher than +35℃.
2. In atmospheric conditions, the air is clean, the relative humidity at the highest temperature +40℃ does not exceed 50%, in the lower temperature is allowed to have a higher relative humidity, such as +20℃ is 90%, but due to temperature changes, occasionally produce moderate condensation.
3. The altitude shall not exceed 2000m.
4. The device is suitable for transportation and storage of the following temperatures: -25℃ to 55℃, in a short period of time (no more than 24h) up to +70℃, under these limit temperatures, the device should avoid any irreversible damage and should be able to work normally under normal conditions.
5. If the above conditions cannot be met, it shall be solved through negotiation between the user and the manufacturer.。